Công tắc cảm ứng chuyển động THEBEN SPHINX 105-220

Công tắc cảm ứng chuyển động THEBEN SPHINX 105-220
Cảm biến chuyển động, điều khiển đèn theo sự hiện diện và độ sáng, gắn tường/trần nổi, gắn góc (phụ kiện), IP55-ngoài trời/trong nhà, góc quét 220°, tầm quét 15m, trễ: 1s -20 min, tải 2300W. Điều khiển từ xa (phụ kiện-mua thêm)
Features
-  Motion detector (PIR)
-  Wall and ceiling installation
-  220° detection angle
-  Particularly suitable for sides of properties, entrances and drives
-  Automatic lighting control based on presence and brightness
-  Sensor head can be adjusted horizontally by ± 90°, vertically by 90° upwards and 25° downwards
-  creating universal installation option and optimum setting of detection area
-  Additional creep under protection for 360° detection with 5 m diameter at installation height of 2.5 m. Can be operated via remote control
-  Detection area can be limited using enclosed segments
-  Mixed light measurement suitable for the control of fluorescent, incandescent and halogen lamps
-  Zero-cross switching for relay-saving switching and high lamp loads
-  Instant start-up possible via factory preset
-  A cover plate protects controls against manipulation
-  Single-handed plug-in installation with captive screws
-  RC 105 Pro, service remote control (optional)
-  RC 105, user remote control (optional)
-  Adjustable brightness switching value and switch-off delay
-  Zero-cross swithcing for relay-saving switching and high lamp loads
-  Teach-in of current brightness value possible via remote control
-  Impulse function can be combined with staircase time switches (ELPA)
-  Test function for checking detection area
Specifications

Operating voltage	230 V AC
Frequency	50 – 60 Hz
Stand-by consumption	0,9 W
Light measurement	Mixed light measurement
Number of channels	1
Type of contact	NO contact
Installation type	Wall and ceiling installation
Setting range brightness	2 – 2000 lx
Switching capacity light	16 A (at 230 V AC, cos φ = 1), 10 A (at 230 V AC, cos φ = 0.6), 8 AX (at 230 V AC, cos φ = 0.3)
Detection angle	220°
Light switch-off delay	1 s-20 min
Incandescent lamp load	2300 W
Fluorescent lamp load (conventional) not corrected	900 VA
Fluorescent lamp load (conventional) parallel-corrected	400 VA
Fluorescent lamp load (conventional) series-corrected	900 VA
Fluorescent lamp load (conventional) lead-lag circuit	900 VA
Fluorescent lamp load (electronic ballast)	400 VA
Energy saving lamps	9 x 7 W, 7 x 11 W, 7 x 15 W, 7 x 20 W, 7 x 23 W
Lamps	Incandescent/halogen lamps, Fluorescent lamps, Energy saving lamps, LEDs
Ambient temperature	-25 °C … +55 °C
Protection class	II
Type of protection	IP 55

-  Hãng sản xuất THEBEN của Đức.
-  Bảo hành: 12 tháng.

Công tắc cảm ứng chuyển động THEBEN SPHINX 105-220
Cảm biến chuyển động, điều khiển đèn theo sự hiện diện và độ sáng, gắn tường/trần nổi, gắn góc (phụ kiện), IP55-ngoài trời/trong nhà, góc quét 220°, tầm quét 15m, trễ: 1s -20 min, tải 2300W. Điều khiển từ xa (phụ kiện-mua thêm)
Features
-  Motion detector (PIR)
-  Wall and ceiling installation
-  220° detection angle
-  Particularly suitable for sides of properties, entrances and drives
-  Automatic lighting control based on presence and brightness
-  Sensor head can be adjusted horizontally by ± 90°, vertically by 90° upwards and 25° downwards
-  creating universal installation option and optimum setting of detection area
-  Additional creep under protection for 360° detection with 5 m diameter at installation height of 2.5 m. Can be operated via remote control
-  Detection area can be limited using enclosed segments
-  Mixed light measurement suitable for the control of fluorescent, incandescent and halogen lamps
-  Zero-cross switching for relay-saving switching and high lamp loads
-  Instant start-up possible via factory preset
-  A cover plate protects controls against manipulation
-  Single-handed plug-in installation with captive screws
-  RC 105 Pro, service remote control (optional)
-  RC 105, user remote control (optional)
-  Adjustable brightness switching value and switch-off delay
-  Zero-cross swithcing for relay-saving switching and high lamp loads
-  Teach-in of current brightness value possible via remote control
-  Impulse function can be combined with staircase time switches (ELPA)
-  Test function for checking detection area
Specifications

Operating voltage	230 V AC
Frequency	50 – 60 Hz
Stand-by consumption	0,9 W
Light measurement	Mixed light measurement
Number of channels	1
Type of contact	NO contact
Installation type	Wall and ceiling installation
Setting range brightness	2 – 2000 lx
Switching capacity light	16 A (at 230 V AC, cos φ = 1), 10 A (at 230 V AC, cos φ = 0.6), 8 AX (at 230 V AC, cos φ = 0.3)
Detection angle	220°
Light switch-off delay	1 s-20 min
Incandescent lamp load	2300 W
Fluorescent lamp load (conventional) not corrected	900 VA
Fluorescent lamp load (conventional) parallel-corrected	400 VA
Fluorescent lamp load (conventional) series-corrected	900 VA
Fluorescent lamp load (conventional) lead-lag circuit	900 VA
Fluorescent lamp load (electronic ballast)	400 VA
Energy saving lamps	9 x 7 W, 7 x 11 W, 7 x 15 W, 7 x 20 W, 7 x 23 W
Lamps	Incandescent/halogen lamps, Fluorescent lamps, Energy saving lamps, LEDs
Ambient temperature	-25 °C … +55 °C
Protection class	II
Type of protection	IP 55

-  Hãng sản xuất THEBEN của Đức.
-  Bảo hành: 12 tháng.