Công tắc cảm ứng ánh sáng THEBEN LUNA 112 top2 AL

Công tắc cảm ứng ánh sáng kỹ thuật số THEBEN LUNA 112 top2 AL
-  Twilight switch
-  External light sensor included in delivery
-  2 channels
-  2 external contol inputs
-  Channel-independent operating hour counter
-  Switching brightness digitally adjustable
-  Adjustable On and Off switching delay to avoid switching errors caused by lightninh, car headlights etc. Preset 1 minute
-  Switching brightness and switching delay can be set separately for switching On and Off
-  Onscreen display of channel and switching status as well as current lux value
-  DuoFix spring terminals
-  for 2 conductors per connection terminal
-  Zero-cross switching for relay-saving switching and high lamp loads (not with 24 V devices)
-  Up to 4 sensors can be attached
-  Up to 10 devices can be connected to a digital sensor
-  Interface for OBELISK top2 memory card (PC programming)
-  2. insertable switching program
-  Copying programs
-  Storing programs
-  External light sensor included in delivery
-  Extended brightness range
-  Permanent switching ON/OFF
-  Test function
-  (Permanent ON) to check the installation independently of set brightness value
-  Switching preselection
-  Display back light (can be turned off)
-  PIN coding
-  External input
-  for switches or buttons
-  Operating hour counter
-  with reminder function
 
Specifications

Operating voltage	100 – 240 V AC
Frequency	50 – 60 Hz
Number of channels	2
External inputs	2
Stand-by consumption	1,3 W
Setting range brightness	1 – 99000 lx
Preset brightness value	15 lx
Switch-on delay	0 – 59 min
Switch-off delay	0 – 59 min
Type of contact	2 two-way changeover contacts
Switching output	Potential-free, not for SELV
Width	3 modules
Installation type	DIN rail
Type of connection	DuoFix spring terminals
Keyboards	4 touch buttons
Switching capacity	16 A (at 250 V AC, cos φ = 1), 10 A (at 250 V AC, cos φ = 0.6), 10 AX (Fluorescent lamp load)
Switching capacity min.	ca. 10 mA
Incandescent lamp load	2600 W
Halogen lamp load	2600 W
Fluorescent lamp load (conventional) not corrected	2300 VA
Fluorescent lamp load (conventional) series-corrected	2300 VA
Fluorescent lamp load (conventional) lead-lag circuit	2300 VA
Fluorescent lamp load (conventional) parallel-corrected	800 VA, 80 µF
Energy saving lamps	22 x 7 W, 18 x 11 W, 16 x 15 W, 16 x 20 W, 14 x 23 W
Fluorescent lamp load (electronic ballast)	650 VA
Test approval	VDE
Housing and insulation material	High-temperature resistant, self-extinguishing thermoplastic
Ambient temperature	-30 °C … +55 °C
Type of protection	IP 20, sensor IP 55
Protection class	II, Sensor III
Max. cable length to sensor	100 m

 
-  Hãng sản xuất THEBEN của Đức.
-  Bảo hành: 12 tháng.

Công tắc cảm ứng ánh sáng kỹ thuật số THEBEN LUNA 112 top2 AL

-  Twilight switch
-  External light sensor included in delivery
-  2 channels
-  2 external contol inputs
-  Channel-independent operating hour counter
-  Switching brightness digitally adjustable
-  Adjustable On and Off switching delay to avoid switching errors caused by lightninh, car headlights etc. Preset 1 minute
-  Switching brightness and switching delay can be set separately for switching On and Off
-  Onscreen display of channel and switching status as well as current lux value
-  DuoFix spring terminals
-  for 2 conductors per connection terminal
-  Zero-cross switching for relay-saving switching and high lamp loads (not with 24 V devices)
-  Up to 4 sensors can be attached
-  Up to 10 devices can be connected to a digital sensor
-  Interface for OBELISK top2 memory card (PC programming)
-  2. insertable switching program
-  Copying programs
-  Storing programs
-  External light sensor included in delivery
-  Extended brightness range
-  Permanent switching ON/OFF
-  Test function
-  (Permanent ON) to check the installation independently of set brightness value
-  Switching preselection
-  Display back light (can be turned off)
-  PIN coding
-  External input
-  for switches or buttons
-  Operating hour counter
-  with reminder function
 

Specifications

Operating voltage	100 – 240 V AC
Frequency	50 – 60 Hz
Number of channels	2
External inputs	2
Stand-by consumption	1,3 W
Setting range brightness	1 – 99000 lx
Preset brightness value	15 lx
Switch-on delay	0 – 59 min
Switch-off delay	0 – 59 min
Type of contact	2 two-way changeover contacts
Switching output	Potential-free, not for SELV
Width	3 modules
Installation type	DIN rail
Type of connection	DuoFix spring terminals
Keyboards	4 touch buttons
Switching capacity	16 A (at 250 V AC, cos φ = 1), 10 A (at 250 V AC, cos φ = 0.6), 10 AX (Fluorescent lamp load)
Switching capacity min.	ca. 10 mA
Incandescent lamp load	2600 W
Halogen lamp load	2600 W
Fluorescent lamp load (conventional) not corrected	2300 VA
Fluorescent lamp load (conventional) series-corrected	2300 VA
Fluorescent lamp load (conventional) lead-lag circuit	2300 VA
Fluorescent lamp load (conventional) parallel-corrected	800 VA, 80 µF
Energy saving lamps	22 x 7 W, 18 x 11 W, 16 x 15 W, 16 x 20 W, 14 x 23 W
Fluorescent lamp load (electronic ballast)	650 VA
Test approval	VDE
Housing and insulation material	High-temperature resistant, self-extinguishing thermoplastic
Ambient temperature	-30 °C … +55 °C
Type of protection	IP 20, sensor IP 55
Protection class	II, Sensor III
Max. cable length to sensor	100 m

 
-  Hãng sản xuất THEBEN của Đức.
-  Bảo hành: 12 tháng.