Công tắc cảm ứng hiện diện THEBEN COMPACT OFFICE
Công tắc cảm ứng hiện diện THEBEN COMPACT OFFICE
Cảm biến hiện diện Compact Office dùng cho điều khiển chiếu sáng tự động, có thêm ngõ ra để tự động tắt mở điều hòa không khí và quạt thông gió trong văn phòng hoặc phòng khách.
- Cảm biến sự hiện diện (PIR), 2 kênh, độ nhạy cao.
- Góc phát hiện rộng 360°
- Tầm quét 5x5m/8x8m (ngồi/đi)
- Gắn âm trần
- Điều chỉnh độ sáng từ 10 vn_ 1500 lux
- Kênh 1, trễ: xung (0,5s), 10s -20 min (tắt) tự điều chỉnh
- Kênh 2, trễ 10svn_120min/0svn_10min (tắt/bật)
- Chức năng nối với cảm biến hoặc công tắc ngoài để điều khiển thủ công.
- Chức năng mở rộng matster-slave.
- Chế độ tự động và bán tự động.
- Chức năng cảm biến an ninh.
- Phù hợp với các loại đèn: như đèn huỳnh quang, halogen, đèn sợi đốt , đèn led.
- Tiêu chuẩn chống nước và bụi: IP40
- Môi trường hoạt động : 0°C…+50°C
Features
- Presence detector (PIR)
- Square detection area
- Mixed light measurement
- Light switch output (relay, 230 V)
- Presence switch output (relay, potential-free)
- Automatic control of lighting and HVAC as well as room monitoring function
- Lighting control with light threshold value and self-learning switch-off delay
- Choice of fully or semi automatic operation
- Sensor or switch options for manual switching
- Pulse function for staircase time switch
- HVAC control with switch-on and switch-off delay
- Room monitoring with selective movement detection
- Fully or semi-automatic: In 'Fully automatic'mode, the lighting switches on and off automatically according to presence and light In 'Semi-automatic'mode, it must be switched on manually and it switches off automatically
- Manual override: The lighting can be manually switched on or off at any time via sensors or switches
- Room/corridor sensor function: In the 'corridor'setting, the detector functions as a staircase time switch and it cannot be switched off manually
- The pulse function is for controlling a staircase time switch
- Presence switch contact for HVAC control: The switching behaviour of the potential-free contact is only controlled by presence
- The switch-on delay prevents instantaneous switch on. The contact only closes on completion of the switch-on delay
- The sensitivity of the presence switch output is reduced in the 'monitoring'position. The contact indicates the presence of people with a high degree of certainty
- Master/slave parallel switching: Up to ten detectors can be connected with each other to extend the detection area. The master switches the load. All other detectors merely provide presence information as slaves
- Master/master parallel switching: Up to ten detectors can be connected with each other to control several lighting groups. Each master controls its lighting group according to its own brightness measurements. Presence is detected by all the detectors
- Device can be connected as master or slave
- A maximum of 10 detectors can be switched at the same time
- The switching behaviour of the presence detector is controlled by presence and light.
- The self-learning switch-off delay adjusts to occupants'behaviour
- The presence detector has mixed light measurement and is suitable for switching the following types of lamps: fluorescent lamps (FL/PL), halogen and incandescent lamps as well as LEDs
- The square detection area allows accurate and simple planning
- Test operation mode checks the detection area and installation
- The parameters can either be set using the potentiometer or via the optional service remote control QuickSet plus.
Specifications
Operating voltage
| 230 V AC
|
Frequency
| 50 Hz
|
Recommended installation height
| 2 – 3 m
|
Installation type
| Ceiling installation
|
Power consumption
| 0,7 W
|
Light measurement
| Mixed light measurement
|
Setting range brightness
| 10 – 1500 lx
|
Light switch-off delay
| Impuls (0,5 s), 10 s-20 min
|
Type of contact light
| Relay 230 V
|
Lamps
| Incandescent/halogen lamps, Fluorescent lamps, Energy saving lamps, LEDs
|
Resistive load
| 1400 VA
|
Incandescent/halogen lamp load
| 1200 W
|
Compact and flourescent lamps
| 960 VA (cos f = 0,8), 580 VA (cos f = 0,5)
|
Compact and flourescent lamps (Number of electronic ballasts)
| 10 x (1 x 58 W), 5 x (2 x 58 W), 16 x (1 x 36 W), 8 x (2 x 36 W), 16 x (smaller than 36 W)
|
Switch-on delay presence
| 0 s – 10 min
|
Presence switch-off delay
| 10 s-120 min
|
Type of contact presence
| Relay potential-free
|
Switching capacity presence
| 50 W (220 V DC), 50 VA (250 V AC) minimale 0,5 mV/10 mA
|
Switching output
| Potential-free
|
Type of connection
| Screw terminals
|
Max. cable cross section
| 2 x 2,5 mm²
|
Mounting plate
| 70 x 70 mm
|
Size of concealed housing
| 55 mm (NIS, PMI)
|
Ambient temperature
| +0 °C … +50 °C
|
Type of protection
| IP 40 (when fitted)
|
- Hãng sản xuất THEBEN của Đức.
- Bảo hành: 12 tháng.
Công tắc cảm ứng hiện diện THEBEN COMPACT OFFICE
Cảm biến hiện diện Compact Office dùng cho điều khiển chiếu sáng tự động, có thêm ngõ ra để tự động tắt mở điều hòa không khí và quạt thông gió trong văn phòng hoặc phòng khách.
- Cảm biến sự hiện diện (PIR), 2 kênh, độ nhạy cao.
- Góc phát hiện rộng 360°
- Tầm quét 5x5m/8x8m (ngồi/đi)
- Gắn âm trần
- Điều chỉnh độ sáng từ 10 vn_ 1500 lux
- Kênh 1, trễ: xung (0,5s), 10s -20 min (tắt) tự điều chỉnh
- Kênh 2, trễ 10svn_120min/0svn_10min (tắt/bật)
- Chức năng nối với cảm biến hoặc công tắc ngoài để điều khiển thủ công.
- Chức năng mở rộng matster-slave.
- Chế độ tự động và bán tự động.
- Chức năng cảm biến an ninh.
- Phù hợp với các loại đèn: như đèn huỳnh quang, halogen, đèn sợi đốt , đèn led.
- Tiêu chuẩn chống nước và bụi: IP40
- Môi trường hoạt động : 0°C…+50°C
Features
- Presence detector (PIR)
- Square detection area
- Mixed light measurement
- Light switch output (relay, 230 V)
- Presence switch output (relay, potential-free)
- Automatic control of lighting and HVAC as well as room monitoring function
- Lighting control with light threshold value and self-learning switch-off delay
- Choice of fully or semi automatic operation
- Sensor or switch options for manual switching
- Pulse function for staircase time switch
- HVAC control with switch-on and switch-off delay
- Room monitoring with selective movement detection
- Fully or semi-automatic: In 'Fully automatic'mode, the lighting switches on and off automatically according to presence and light In 'Semi-automatic'mode, it must be switched on manually and it switches off automatically
- Manual override: The lighting can be manually switched on or off at any time via sensors or switches
- Room/corridor sensor function: In the 'corridor'setting, the detector functions as a staircase time switch and it cannot be switched off manually
- The pulse function is for controlling a staircase time switch
- Presence switch contact for HVAC control: The switching behaviour of the potential-free contact is only controlled by presence
- The switch-on delay prevents instantaneous switch on. The contact only closes on completion of the switch-on delay
- The sensitivity of the presence switch output is reduced in the 'monitoring'position. The contact indicates the presence of people with a high degree of certainty
- Master/slave parallel switching: Up to ten detectors can be connected with each other to extend the detection area. The master switches the load. All other detectors merely provide presence information as slaves
- Master/master parallel switching: Up to ten detectors can be connected with each other to control several lighting groups. Each master controls its lighting group according to its own brightness measurements. Presence is detected by all the detectors
- Device can be connected as master or slave
- A maximum of 10 detectors can be switched at the same time
- The switching behaviour of the presence detector is controlled by presence and light.
- The self-learning switch-off delay adjusts to occupants'behaviour
- The presence detector has mixed light measurement and is suitable for switching the following types of lamps: fluorescent lamps (FL/PL), halogen and incandescent lamps as well as LEDs
- The square detection area allows accurate and simple planning
- Test operation mode checks the detection area and installation
- The parameters can either be set using the potentiometer or via the optional service remote control QuickSet plus.
Specifications
Operating voltage
| 230 V AC
|
Frequency
| 50 Hz
|
Recommended installation height
| 2 – 3 m
|
Installation type
| Ceiling installation
|
Power consumption
| 0,7 W
|
Light measurement
| Mixed light measurement
|
Setting range brightness
| 10 – 1500 lx
|
Light switch-off delay
| Impuls (0,5 s), 10 s-20 min
|
Type of contact light
| Relay 230 V
|
Lamps
| Incandescent/halogen lamps, Fluorescent lamps, Energy saving lamps, LEDs
|
Resistive load
| 1400 VA
|
Incandescent/halogen lamp load
| 1200 W
|
Compact and flourescent lamps
| 960 VA (cos f = 0,8), 580 VA (cos f = 0,5)
|
Compact and flourescent lamps (Number of electronic ballasts)
| 10 x (1 x 58 W), 5 x (2 x 58 W), 16 x (1 x 36 W), 8 x (2 x 36 W), 16 x (smaller than 36 W)
|
Switch-on delay presence
| 0 s – 10 min
|
Presence switch-off delay
| 10 s-120 min
|
Type of contact presence
| Relay potential-free
|
Switching capacity presence
| 50 W (220 V DC), 50 VA (250 V AC) minimale 0,5 mV/10 mA
|
Switching output
| Potential-free
|
Type of connection
| Screw terminals
|
Max. cable cross section
| 2 x 2,5 mm²
|
Mounting plate
| 70 x 70 mm
|
Size of concealed housing
| 55 mm (NIS, PMI)
|
Ambient temperature
| +0 °C … +50 °C
|
Type of protection
| IP 40 (when fitted)
|
- Hãng sản xuất THEBEN của Đức.
- Bảo hành: 12 tháng.
